ABSTRACT
Objective@#To explore the relationship between serum complement 1q (C1q) and C1q/tumor necrosis factor-related protein 1 (CTRP1) levels in patients with coronary atherosclerotic heart disease (CHD) and their clinical value.@*Methods@#Case-control study.115 patients with CHD who were hospitalized in the Department of Cardiology of Ningxia Medical University General Hospital from January 2018 to November 2018 were selected as the case group, including 72 males and 43 females, aged 35-82 years, average (59.96±9.49) years old. There were three subgroups: stable angina group (SAP, n=12), unstable angina group (UA, n=69), and acute myocardial infarction group (AMI, n=34). The control group was selected from 43 healthy subjects in the same period, including 21 males and 22 females, aged 23-71 years, with an average of (45.00±10.66) years old. Serum C1q and CTRP1 levels were tested by immunoturbidimetry and ELISA, and other biochemical indicators such as triglyceride (TG) and total cholesterol (CHOL) were detected.Multiple linear regression was used to analyze the influence of various factors on C1q level. ROC curve and area under the curve (AUC) to explore the diagnostic value of C1q and CTRP1.@*Results@#The C1q level in the CHD group (184.06±31.05) mg/L was higher than that in the control group (122.22±28.18) mg/L (t=-11.405, P<0.001). The AMI group (192.80±34.08) mg/L was significantly higher than the SAP group (169.17±27.13) mg/L (t=-2.328, P=0.021).The CTRP1 level in the CHD group [241.85(79.38)] ng/ml was lower than that in healthy control group [292.7(67.64)] ng/ml (Z=-3.64, P<0.001). Group B with higher Gensini score (t=3.672, P<0.001) and group C (t=2.529, P=0.013) had higher C1q levels than group A.After adjusting for the effects of age, sex and other indicators, C1q levels were correlated with HDL-C (β=-0.582, P<0.001),CHOL (β=0.384,P<0.001) and systolic blood pressure (β=0.142,P=0.038). The ROC curve shows that when the CHD is diagnosed, the sensitivity of C1q level >150.82 mg/L is 87%,the specificity is 88.4%, and the AUC is 0.942. The corresponding sensitivity and specificity of CTRP1 <281.80 ng/ml are 76.5% and 60.5% respectively, and the AUC is 0.688. The AUC obtained by combined predictors was 0.944, and the sensitivity and specificity were 89.6% and 86.0% respectively. When AMI is diagnosed, C1q level >178.3 mg/L, corresponding sensitivity and specificity are 70.6% and 66.1%, the AUC is 0.726, CTRP1 has no diagnostic value.@*Conclusions@#Serum C1q levels in patients with CHD are elevated, and AMI patients are higher than SAP patients; C1q may be a potential marker reflecting the severity of coronary artery disease; there is no significant correlation between serum C1q and CTRP1 in CHD patients.
ABSTRACT
Objective To explore the relationship between serum complement 1q (C1q) and C1q/tumor necrosis factor-related protein 1 (CTRP1) levels in patients with coronary atherosclerotic heart disease (CHD) and their clinical value.Methods Case-control study.115 patients with CHD who were hospitalized in the Department of Cardiology of Ningxia Medical University General Hospital from January 2018 to November 2018 were selected as the case group, including 72 males and 43 females, aged 35-82 years, average (59.96 ± 9.49) years old. There were three subgroups: stable angina group (SAP, n=12), unstable angina group (UA,n=69), and acute myocardial infarction group (AMI, n=34). The control group was selected from 43 healthy subjects in the same period, including 21 males and 22 females, aged 23-71 years, with an average of (45.00 ± 10.66) years old. Serum C1q and CTRP1 levels were tested by immunoturbidimetry and ELISA, and other biochemical indicators such as triglyceride (TG) and total cholesterol (CHOL) were detected.Multiple linear regression was used to analyze the influence of various factors on C1q level. ROC curve and area under the curve (AUC) to explore the diagnostic value of C1q and CTRP1. Results The C1q level in the CHD group (184.06±31.05) mg/L was higher than that in the control group (122.22±28.18) mg/L (t=-11.405, P<0.001). The AMI group (192.80 ± 34.08) mg/L was significantly higher than the SAP group (169.17 ± 27.13) mg/L (t=-2.328, P=0.021). The CTRP1 level in the CHD group [241.85(79.38)] ng/ml was lower than that in healthy control group [292.7(67.64)] ng/ml (Z=-3.64, P<0.001). Group B with higher Gensini score (t=3.672, P<0.001) and group C (t=2.529, P=0.013) had higher C1q levels than group A.After adjusting for the effects of age, sex and other indicators, C1q levels were correlated with HDL-C (β=-0.582, P<0.001),CHOL (β=0.384,P<0.001) and systolic blood pressure (β=0.142,P=0.038). The ROC curve shows that when the CHD is diagnosed,the sensitivity of C1q level>150.82 mg/L is 87％,the specificity is 88.4％, and the AUC is 0.942. The corresponding sensitivity and specificity of CTRP1<281.80 ng/ml are 76.5％and 60.5％ respectively, and the AUC is 0.688. The AUC obtained by combined predictors was 0.944, and the sensitivity and specificity were 89.6％ and 86.0％ respectively. When AMI is diagnosed, C1q level >178.3 mg/L, corresponding sensitivity and specificity are 70.6％ and 66.1％, the AUC is 0.726, CTRP1 has no diagnostic value. Conclusions Serum C1q levels in patients with CHD are elevated,and AMI patients are higher than SAP patients;C1q may be a potential marker reflecting the severity of coronary artery disease;there is no significant correlation between serum C1q and CTRP1 in CHD patients.
ABSTRACT
<p><b>OBJECTIVE</b>To evaluate the clinical effects of transpedicular eggshell technique in treating thoracolumbar deformity.</p><p><b>METHODS</b>From December 2008 to December 2011,36 patients with thoracolumbar deformity were treated with transpedicular eggshell technique. There were 20 males and 16 females with an average age of 45 years old (ranged from 20 to 58). Among them, 5 cases were congenital hemivertebrae deformity, 12 cases were secondary to tuberculotic deformity, 14 cases were post-traumatic deformity with pain, 5 cases were ankylosing spondylitis. Low back pain, living ability, scoliotic Cobb angle were analyzed according to VAS scoring, Oswestry Disability Index (ODI), radiological examination.</p><p><b>RESULTS</b>Average operative time was 245 min and average bleeding was 1 900 ml in 36 patients. All patients were followed up more than 1 year and obtained bone fusion at 1 year after operation. Preoperative,postoperative at 1 week and 1 year, VAS scoring was 7.2 +/- 1.4, 2.5 +/- 1.0, 1.8 +/- 0.5, respectively; ODI was (72.50 +/- 10.80)%, (42.50 +/- 11.10)%, (22.50 +/- 7.90)%, respectively; kyphosis Cobb angle was (76.31 +/- 2.52) degrees, (23.66 +/- 1.16) degrees, (23.67 +/- 1.16) degrees, respectively; lumbar scoliosis Cobb angle was (71.86 +/- 4.02) degrees, (30.81 +/- 2.33) degrees, (30.82 +/- 2.32) degrees, respectively. Postoperative at 1 week and 1 year,above data had obviously improved than that of preoperative (P < 0.05); and there was no significant difference in Cobb angle between postoperative at 1 week and postoperative at 1 year (P > 0.05).</p><p><b>CONCLUSION</b>Treatment of thoracolumbar deformity with transpedicular eggshell technique could obtain effective correcting and clinical results.</p>
Subject(s)
Adult , Female , Humans , Male , Middle Aged , Young Adult , Follow-Up Studies , Orthopedic Procedures , Methods , Thoracic Vertebrae , Congenital Abnormalities , Diagnostic Imaging , General Surgery , Tomography, X-Ray ComputedABSTRACT
<p><b>OBJECTIVE</b>To explore the characters of lung injury induced by tin dusts and to provide the diagnosis evidence of tin pneumoconiosis.</p><p><b>METHODS</b>Forty SD rats were randomly divided into four groups: the group exposed to tin dusts from smelting workshop, the group exposed to tin dusts from tin refining workshop, the positive control group exposed to standard quartz dusts and the negative control group exposed to saline. The pathological changes of rat lungs were observed dynamically.</p><p><b>RESULTS</b>In rats exposed to tin dusts, on the 30th day after exposure to tin dusts, the scattered hoar tip size of the spots in surface and section of the lungs were observed, the scattered focal granulomatous inflammation around the small bronchi and dust particles in lung tissue were observed under microscope; on the 90th day after exposure to tin dusts, the granulomatous inflammation increase, the fibroblasts proliferation, collagen fibers formation and positive VG staining were found. There were significant differences, as compared with positive or negative controls (P < 0.05). These pathological changes were basically the characters of specific pathological changes in early tin pneumoconiosis.</p><p><b>CONCLUSION</b>Non-ferrous metal tin dusts can induce the specific lung injury (granuloma formation) in lung tissue of rats exposed to tin dusts, which fulfilled the diagnostic criteria of specific pathological changes in early tin pneumoconiosis.</p>
Subject(s)
Animals , Rats , Dust , Lung , Pathology , Lung Injury , Diagnosis , Pathology , Rats, Sprague-Dawley , TinABSTRACT
<p><b>AIM</b>To study the dissolution rate of solid pharmaceutical preparation on-line, a multiple channel fiber-optic chemical sensor based on fluorescence multiple quenching (FOCSMQ) without filtering and sampling was made.</p><p><b>METHODS</b>Using the multiple channel FOCSMQ linked with computer, the dissolution rates of ofloxacin tablets, metronidazole tablets and nitrofurantoin tablets were monitored continuously on-line. The instrument can give the sample data, display the real time curve and calculate the T1/2 and td automatically. A computer was used to select the best function from five common fitting models to fit the dissolution curve.</p><p><b>RESULTS</b>The average recoveries of the FOCSMQ method were 97.4%-104.4%, 97.4%-103.8% and 96.6%-102.1%. The RSDs (n = 6) of within-day and between-day were less than 5%. The parameters of the dissolution and all results of measurement using the instrument have no significant difference compared with the Chinese Pharmacopoeia (ChP) (2000) method and the United States Pharmacopoeia (USP) (23) method (P > 0.05). It does not need sampling and dilution, and never contaminate sample. It can shorten time of the experiment.</p><p><b>CONCLUSION</b>The method is simple, rapid and reliable.</p>